Crewvia
Home / Free tools / Roofing calculator
Free tool

Roofing calculator: squares, materials and price

Enter the measurements and pitch. Get squares with waste, a full material list and a job total with your own prices. Then turn it into an estimate in one click.

1. Roof measurements

Measure the footprint the roof covers, including overhangs, and pick the pitch. Already have a measurement report? Type the roof area instead.

2. Edges and extras (feet)
Roof area
0 sq ft
Squares
0.0
Order with waste
0 squares
Job total
$0.00

Starts a free 7-day Crewvia trial. Every line lands in a draft estimate you can send for an online signature.

UseMaterial or laborYour priceQuantity and cost

How the roofing math works

Roof area = length × width × pitch factor. Squares = roof area ÷ 100. Shingles are ordered in whole bundles, 3 to a square, after adding waste.

  • Underlayment: about 10 squares per roll of synthetic.
  • Ice and water shield: eaves plus valleys, about 66 feet per roll.
  • Starter strip: eaves plus rakes, about 105 feet per bundle.
  • Hip and ridge cap: hips plus ridges, about 31 feet per bundle.
  • Drip edge: eaves plus rakes, in 10-foot pieces.
  • Nails: about one box of coil nails per 16 squares.
  • Dumpster: about one load per 30 squares of tear-off per layer.

Coverage varies by brand, so check your supplier's numbers before you order.

Pitch factor table

PitchFactorAngle
3/121.03114.0°
4/121.05418.4°
5/121.08322.6°
6/121.11826.6°
7/121.15830.3°
8/121.20233.7°
9/121.25036.9°
10/121.30239.8°
12/121.41445.0°

Questions

How many squares is my roof?

One roofing square is 100 square feet of roof surface. Multiply the length and width of the area the roof covers, multiply by the pitch factor for your slope (1.118 for 6/12, for example), then divide by 100.

How much waste should I add?

About 10% for a simple gable roof, 12 to 15% for hips, and 15 to 20% for cut-up roofs with many valleys and dormers.

How many bundles of shingles are in a square?

Most architectural and 3-tab shingles come 3 bundles to a square. Check the wrapper: some heavy designer shingles are 4 or 5 bundles a square.

What is the pitch factor?

It converts the flat footprint into the real sloped surface. It is the square root of 1 plus (rise / 12) squared. A 4/12 roof is 1.054, 6/12 is 1.118, 8/12 is 1.202, 12/12 is 1.414.

Are these prices right for my area?

They are starting points only. Type your own supplier and labor prices and the totals update. Saving to Crewvia keeps your prices for every future roof.

Measure, price and sell roofs in one place

Crewvia has this roof calculator built in, plus Good, Better and Best options, online signatures, insurance claim packets and job profit tracking.

Start your 7-day free trial